This is an article for verification. ZOB the test article of the content translation synchronization plug-in. After synchronizing to the English station, Japanese station or other target language station, the common description text should be translated; Code block, short code, media label, technical parameters, model, unit, standard number, authentication abbreviations and internal links should be handled according to the rules.
I. General text translation test
This is a common text that should be translated into the target language. This section contains product introduction, application scenarios, purchase instructions, after-sales service, and technical support instructions.
This product is suitable for machinery manufacturing, food processing, electronics factory, automobile maintenance, spraying industry and packaging production line. Customers can choose different models according to the actual gas consumption, pressure range and installation space.
This is an ordinary quoted text and should be translated. But among them 7.5 kW, 8 bar, 1.2 m³/min, 380V/50Hz, ISO 8573-1 Class 0 you must leave it as it is.
Second, the internal link mapping test of the body
Please check ourproduct Details page. After synchronization, if the target language site has a corresponding product translation, the product link should be mapped to the corresponding product of the target site. URL.
Test the common page link here:about our page. If the target language site has a corresponding page translation and the synchronization relationship is correct, the page link should be mapped to the corresponding page of the target site. URL.
Test the external link here:YouTube external link. External links should not be replaced.
Test email and phone links here:[email protected] +86 138 0000 0000. mailto and tel links should not be translated or destroyed.
3. Download and replace text images
The following image is used to download and replace the text image. Enable download and replace images in the body content URL after that, if the image actually exists and the media library of the target site is written successfully, the image address in the body of the target site should become the media library of the target site. URL.
If the destination site still displays the image address of the origin site, check the plug-in log to confirm whether the image does not exist, the download failed, the media library failed to write, the same domain judgment skipped, or the text Image Replacement switch is not enabled.
IV. pre / code block protection test
The following PHP the code block should be completely protected and should not be translated, nor should the Chinese string in the code be changed.
/**
* 这里是代码块，应该完整保护，不应该被翻译。
*/
function zob_test_message() {
$message = '产品同步成功';
$power = '7.5 kW';
$flow = '1.2 m³/min';
echo esc_html( $message . ' - ' . $power . ' - ' . $flow );
}
This text is behind the code block and should continue to be translated normally.
echo '这是一段单独 code 标签内容，应该被保护，不应该翻译';
5. script / style / noscript / textarea protection test
The following script and style content should be protected and not translated.
VI. template/ SVG / MathML origin site retention test
This section is used to determine WordPress whether the origin site allows you to save template, svg, and math tags. After publishing, check the source code of the Chinese origin site. If the Chinese origin site does not have these tags, the destination site cannot verify the synchronization protection of these tags.
VII, WordPress short Code protection test
The following is WordPress short Code test. The short code should be protected as a whole and should not be translated or destroyed. Quotation marks must be kept as standard English double quotation marks.
8. iframe / video / audio / source / track Protection Test
The following is the embedding of iframe video. iframe tags and attributes should be protected.
The following is a local video test. video, source, track, and poster structures should be protected.
The following is the audio test. audio and source should be protected.
IX. object / embed / param protection test
The following are object, embed, and param tests. Tags and attributes should be protected.
X. Basic product parameter protection test
| Parameter name | Parameter value | Test requirements |
|---|---|---|
| Exhaust volume | 1.2 m³/min | m³/min must remain unchanged and cannot become m/min. |
| Power | 7.5 kW | kW the case must remain unchanged. |
| Working pressure | 8 bar | bar must remain unchanged. |
| Maximum pressure | 1.0 MPa | MPa the case must remain unchanged. |
| Rotational speed | 1450 rpm | rpm must remain unchanged. |
| Power supply | 380V/50Hz | 380V/50Hz must remain unchanged. |
| Cooling water flow | 20 L/min | L/min the case must remain unchanged. |
11. More Unit combination protection tests
The rated flow rate of this equipment is 72 m³/h, the maximum traffic can be reached 0.035 m³/s.
The exhaust volume of the standby model is 1.5 m3/min, the system traffic is 90 m3/h.
Air coolant flow rate 5 m/s, the conveying speed is 120 m/min.
The noise level is ≤85 dB(A), about 78 dB.
The ambient temperature range is -10°C ~ 45°C, the maximum exhaust temperature does not exceed 80℃.
The weight of the device is 350 kg, the package weight is about 420 kg.
The filtering accuracy is 0.01 μm, can also write 0.01 um.
Compressed air flow optional 35 CFM or 60 SCFM.
List of individual units: m³/min, kW, bar, MPa, rpm, V, Hz, L/min, dB(A), μm, CFM, SCFM, N·m.
12. Size, scope and special symbol protection test
| Dimensions | 1000×800×1200 mm |
| Packing size | 1100 x 900 x 1300 mm |
| Pressure Range | 0.7-1.0 MPa |
| Operating temperature | -10°C ~ 45°C |
| Humidity Range | ≤80% |
| Torque | 120 N·m |
| Alternate writing | 120 Nm |
13. Model, SKU, standard number and certification protection test
The model of this product is VIP-75A, the standby model is ZOB-100, TKYJ-30, VPM-100 and AF-200.
Equipment compliance ISO 8573-1 Class 0 compressed air standard.
Test reference standards include ISO 8573-1, GB/T 3853, IEC 60204-1, DIN 51506, API 619, ASME B31.3 and ANSI b16.5.
Products available CE, UL, RoHS, TUV, TÜV, UKCA, FCC, SGS, ETL, CB and REACH authentication information.
Please confirm CE, UL, RoHS, TUV, TÜV, ISO, IEC, DIN, API, ASME, ANSI, CSA, UKCA, FCC, SGS keep the case unchanged.
XIV. Protection level, insulation level and electrical parameter protection test
Motor protection level is IP54, export model optional IP55 or IP65.
Insulation grade F级绝缘, can also write Class F. Other models may be used B级绝缘, H级绝缘, Class B or Class H.
The standard power supply is 380V/50Hz, the export version is optional 220V/60Hz.
The control voltage is 24V, the signal current is 4-20 mA.
Motor Power 7.5 kW, standby power is optional 11 kW, 15 kW, 22 kW.
Controller Support 50Hz and 60Hz two frequencies.
The output frequency range of the sensor is 10 kHz ~ 100 kHz.
The number of power phases includes 1PH and 3PH, it is required to keep the original after synchronization.
15. Interface, pipe diameter and thread protection test
| Supervisor interface | DN25 |
| Standby interface | DN 50 |
| Threaded interface | NPT1/2 |
| Instrument interface | G1/4 |
| English interface | BSP 1/2 |
| Taper Pipe thread | PT 1/4 |
| Taper Pipe thread | Rc 1/2 |
16. Material and parts model protection test
Host shell material optional SS304, SS316, SUS304, SUS316, Q235 and 45# steel.
Bearing model is SKF 6205, lubricating oil recommended ISO VG46.
The filter model is AF-200, air-oil separator model is OS-75A.
Can be used inside the device 304 stainless steel and 316 stainless steel, SS304, SS316, Q235, 45# steel you must leave it as it is.
17. Mixed paragraph comprehensive test
VIP-75A it is an energy-saving air compressor suitable for machinery manufacturing, food processing and electronic factories. The rated power is 7.5 kW, the exhaust volume is 1.2 m³/min, the working pressure is 8 bar.
This device supports ISO 8573-1 Class 0 air quality requirements, interface specifications are DN25, the size of the whole machine is 1000×800×1200 mm, the weight is about 350 kg.
The standard power supply is 380V/50Hz, the control voltage is 24V, the signal current is 4-20 mA, the noise level is ≤85 dB(A).
If after Translation m³/min, kW, bar, MPa, rpm, V, Hz, L/min, DN25, ISO 8573-1 Class 0, VIP-75A, CE, UL, RoHS, TUV, IP54, F级绝缘 if all remain the same, the technical parameter protection rules are passed.
18. Final judgment description
After the synchronization is complete, check whether the normal body has been translated, and check the code block, short code, script, style, textarea, template, iframe, video, audio, object, svg, math, whether the technical parameters, units, models, standard numbers, and certification abbreviations remain the same.
'''